Product Specs
Power Rating
- Maximum Power
- 32.5 hp
- Maximum Torque
- 69.6 lb-ft @ 1800 rpm
- Rated Speed
- 3000 rpm
- Minimum Power
- 32.5 hp
Emission Standards
- Emissions
- U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent
General
- Engine Configuration
- Inline 3, 4-Stroke-Cycle Diesel
- Bore
- 3.3 in
- Stroke
- 3.5 in
- Displacement
- 91 in³
- Compression Ratio
- 22.5:1
- Aspiration
- Naturally Aspirated (NA)
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
Power Unit Dimensions
- Length
- 32.3 in
- Width
- 19.6 in
- Height
- 31.2 in
- Weight
- 386 lb
Standard Equipment
-
- Air Inlet System
-
- Inlet manifold
-
- Control System
-
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted air cleaner
- Mounted radiator and fan
-
- Flywheel & Flywheel Housing
-
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- Power Take Off (pto)
-
- Provision for timing case rear facing PTO
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request