Product Specs
Engine Specifications
- Emissions
- U.S. EPA Spark Ignited Stationary NSPS emissions for 2010
- Minimum Rating
- 1680 BHP
- Aspiration
- Turbocharged- 2 stage after-cooled
- Bore
- 6.7 in
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 7.5 in
- Combustion
- Lean Burn
- Oil Change Interval
- 2000 hrs
Governor and Protection
- Governor and Protection
- Electronic (ADEM™ A3)
Capacity for Liquids
- Lube Oil System - Refill
- 143 gal (US)
Standard Equipment
-
- Air Inlet System
-
- Axial Flow Air cleaner
- Single element canister type with service indicator
-
- Cooling System
-
- Two-stage charge air cooling: First stage - JW + OC + 1st stage AC / Second stage - 2nd stage AC
- Engine Cooling and Charge Air Cooling Thermostats
-
- Exhaust System
-
- Water-cooled exhaust elbows and manifolds
- Dry turbocharger housings
- Water-cooled exhaust elbow
-
- Flywheels And Flywheel Housings
-
- SAE No. 21 flywheel
- SAE No. 00 flywheel housing
- SAE Counterclockwise rotation
-
- Fuel System
-
- 7-40 psig gas supply
- Electronic fuel metering valve
- Gas pressure regulator
- Gas shutoff valve
-
- Lubrication System
-
- Crankcase breather — top mounted
- Oil cooler
- Deep Sump Oil Pan
- Oil sampling valve
- Turbo oil accumulator
Attachments
-
- Air Inlet System
-
- Round air inlet adaptors
- Rain shield
-
- Charging System
-
- CSA alternator (24V,65A)
-
- Cooling System
-
- Jacket water inlet flange-hose connection
-
- Exhaust System
-
- Flexible fittings
- Weld Flanges
- Elbow
-
- Fuel System
-
- Fuel filter
-
- Instrumentation
-
- Interconnect Harness
- 8 inch HMI Engine Control Panel
-
- Lubrication System
-
- Lubricating oil
- Oil bypass filter
- Air prelube pump
- Oil pan drain
-
- Starting System
-
- Air pressure regulator
- 90 psi starter
- 150 psi starter