Exterior View
Product Specs
Weights - Approximate
- Nominal Rated Payload
- 400 ton (US)
- Rated Gross Machine Weight
- 1375000 lb
- Chassis Weight
- 474472 lb
- Body Weight
- 94799 lb
- Note (1)
- Consult your tire manufacturer for maximum tire load
- Note (2)
- Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
- Note (4)
- Tier 4 Chassis Weight: 486263 lb (220565 kg)
Engine
- Gross Power - SAE J1995
- 4000 hp
- Net Power - SAE J1349
- 3795 hp
- Engine Model
- Cat® C175-20
- Rated Speed
- 1750 r/min
- Emissions
- U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards.
- Bore
- 6.9 in
- Stroke
- 8.7 in
- Displacement
- 6469 in³
- Note (1)
- Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
- Note (2)
- U.S. EPA Tier 4 Final available for applicable markets.
- Note (3)
- High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available.
Service Refill Capacities
- Fuel Tank
- 1000 gal (US)
- Fuel Tank (Tier 4)
- 1200 gal (US)
- Diesel Exhaust Fluid Tank
- 100 gal (US)
- Cooling System
- 306 gal (US)
- Crankcase
- 103 gal (US)
- Front Wheels - Each
- 16 gal (US)
- Differentials
- 330 gal (US)
- Steering Tank
- 67 gal (US)
- Steering System - Including Tank
- 95 gal (US)
- Brake/Hoist Tank
- 203 gal (US)
- Brake Hoist System - Includes Tank
- 489 gal (US)
- Torque Converter Sump
- 80 gal (US)
- Torque Converter/Transmission System - Including Sump
- 166 gal (US)
- Note (1)
- DEF Tank only available for EPA Tier 4 engine option.
Body Hoists
- Type
- Twin, two-stage hydraulic cylinders with snubbing valve.
- Pump Flow - High Idle
- 317 gal/min
- Relief Valve Setting - Raise
- 3510 psi
- Body Raise Time - High Idle
- 25 s
- Body Lower Time - Float
- 18 s
- Body Power Down- High Idle
- 18 s
Suspension
- Type
- Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments
- Effective Cylinder Stroke - Front
- 3.9 in
- Effective Cylinder Stroke - Rear
- 3.7 in
- Rear axle - Oscillation
- ±3.96 degrees
Capacity - HP Body - 100% Fill Factor
- Struck
- 225 yd³ / 172 m³
- Heaped (SAE 2:1)*
- 330 yd³ / 252 m³
- Note (1)
- Consult your local Cat dealer for body recommendations.
Weight Distributions - Approximate
- Front Axle - Empty
- 47.20%
- Rear Axle - Empty
- 52.80%
- Front Axle - Loaded
- 33.30%
- Rear Axle - Loaded
- 66.70%
- Note
- Weight distributions optimized with Cat body.
Tires
- Tires
- 59/80 R63
- Rims
- 44" x 63"
- Note
- Quick Change Rims optional.
- Note (1)
- Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Final Drives
- Type
- Double reduction, planetary with full floating axles.
- Differential Ratio
- 1.276:1
- Planetary Ratio
- 16.67:1
- Total Reduction Ratio
- 21.26:1
- Note
- Double reduction, planetary with full floating axles.
Braking System
- Service Brakes
- Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
- Front Wet Disc Brake Surface Area
- 20500 in²
- Rear - Wet Disc Brake Surface Area
- 30750 in²
- Standards
- Service and Secondary: ISO 3450:2011
- Parking Brake
- Four-corner, Multi-disc, Spring Applied, Hydraulically Released
- Load Brake
- Rear service brakes
- Note
- Anti-Lock Brake System (ABS) optional with CMD package
Cab
- Air Conditioning
- HFC - 134A refrigerant: 24,300 Btu/h
- Heater / Defroster
- 38900 Btu/h
- Note
- Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
- ROPS Standards (1)
- The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008.
- ROPS Standards (2)
- ROPS (Rollover Protective Structure) meets ISO 3471:2008 criteria and ISO 13459:2012
- FOPS Standards
- FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II criteria and ISO 13459:2012 Level II
Steering
- Steering Angle
- 40 °
- Turning Diameter - Front
- 122.7 ft
- Steering Standards
- ISO 5010:2019
- Note
- Turning Diameter (ISO 7457:2009)
Transmission
- Forward - 1
- 6.6 mile/h
- Forward - 2
- 8.9 mile/h
- Forward - 3
- 12 mile/h
- Forward - 4
- 16.2 mile/h
- Forward - 5
- 21.8 mile/h
- Forward - 6
- 29.4 mile/h
- Forward - 7
- 39.5 mile/h
- Reverse
- 7.4 mile/h
- Top Speed - Loaded
- 39.5 mile/h
Dimensions
- Front Canopy Height - Empty
- 25.33 ft
- Loaded Ground Clearance
- 2.58 ft
- Height - Top of ROPS - Empty
- 21.4 ft
- Engine Guard Clearance - Loaded
- 3.33 ft
- Inside Body Depth - Maximum
- 11 ft
- Loading Height - Empty
- 23 ft
- Overall Height - Body Raised
- 51.5 ft
- Rear Axle - Clearance - Loaded
- 3.08 ft
- Overall Body Length
- 48.6 ft
- Inside Body Length
- 32.75 ft
- Overall Length
- 49.5 ft
- Wheel Base
- 23.58 ft
- Rear Axle - Tail
- 12.9 ft
- Dump Clearance
- 6.58 ft
- Centerline Front Tire Width
- 21.41 ft
- Overall Canopy Width
- 29.91 ft
- Outside Body Width
- 32 ft
- Inside Body Width
- 27.91 ft
- Centerline of Rear Dual Tire Width
- 20.41 ft
- Overall Tire Width
- 31.25 ft
Standard Equipment
-
- Electrical
-
- Alarm, back-up
- Brushless, alternator, 150 ampere
- Batteries, 12V (2) 93 amp-hour
- Converter, 12V electrical
- Electrical system, 24V, 10, 20 and 25 amp
- Battery charge receptacle
- Lighting system:
– Back-up and hazard lights
– Directional signals (front, rear LED)
– Front stair access/Service deck
– Stop/tail lights (LED)
– Engine compartment
– VIMS, blue light (LED)
– Headlights with lo-hi beam selector
-
- Operator Environment
-
- Standard cab:
– Standard optimized operator seats
– Suspension trainer seat
– Flip down front visor
– Standard side of cab access - Deluxe cab:
– Heated and ventilated seats
– Suspension trainer seat
– Retractable front visor
– Rear of cab access and standard side of cab access
– Power windows - Deluxe cold weather cab:
– Heated and ventilated seats
– Suspension trainer seat
– Retractable front visor
– Rear of cab access and standard side of cab access
– Power windows
– Heated mirrors - All cab options include the following features:
- Air conditioner with automatic climate control
- 12V DC power supply (3)
- Coat hook
- Diagnostic connection port
- Dome courtesy light
- Entertainment radio ready 5 amp converter, speakers and wiring harness
- Gauges/Indicators:
– Gauge panel: Transmission fluid temperature; Brake oil temperature; Engine coolant temperature; Fuel level; Torque converter oil temperature
– Electric engine control fault indicator
– Electric hour meter
– Speedometer
– Tachometer
– Transmission gear indicator
– VIMS message center with advisor - Heater/defroster (11 070 kCal/43,930 Btu)
- Horn
- Cat Detect System
- Storage compartments
- Hoist, body control (electric)
- ROPS cab, insulated/sound suppressed
- Seat, operator, air suspension
- Seatbelt, operator, three-points, retractable
- Seat, trainer, air suspension
- Seatbelt, trainer, two-points, retractable
- Stairway and walkway access, 600 mm (23.6 in)
- Steering wheel, multi tilt, padded, telescopic
- Tinted glass
- Window, operator, electric powered
- Windshield wiper, intermittent control and washer
- Cup holder
- Mirrors, right and left
- Standard cab:
-
- Power Train
-
- C175-20 emits equivalent to Tier 2 emission standards:
– Turbocharging (4)/Air-to-Air Aftercooler (ATAAC)
– Air cleaner with precleaner (4)
– Ground level engine shutdown
– Ether starting aid (automatic)
– Elevated low idle control
– Crankcase protection
– Multi-point oil pressure sensing
– Automatic starter protection - Braking system:
– Park brake integrated with gear selector
– Brake release motor (towing)
– Oil-cooled, multi-disc (front and rear) – service, retarding, parking, secondary
– Automatic Retarder Control, adjustable
– Engine overspeed protection
– Extended life brake disc material - Transmission:
– 7-speed, automatic powershift with electronic controls (ECPC)
– Body-up shift inhibitor
– Controlled throttle shifting
– Directional shift management
– Neutral coast inhibitor
– Neutral start switch
– Downshift/Reverse shift inhibitor
– Individual clutch modulation
– Body-up reverse neutralizer
– Programmable top speed
– Lock-up torque converter - Pre-lubrication/engine
- Rear axle continuous lubrication/filtration
- C175-20 emits equivalent to Tier 2 emission standards:
-
- Other Standard Equipment
-
- Traction Control System
- Auto lubrication system
- Aux “buddy” dumping quick connect
- Aux steering quick connect (towing)
- Driveline guard
- Fast fill fuel system
- Fuel filter with water separator
- Ground level VIMS data port
- Ground level battery lockout
- Ground level transmission lockout
- Ground level engine start lockout
- Ground level engine shut-down
- High-speed crankcase oil change
- Reservoirs (3 separate):
– Brake/Hoist, Steering/Fan, Transmission/Converter - Rock ejectors
- Supplemental steering (automatic)
- Tie-down eyes
- Center hitch and tow points (front), tow pin (rear)
- Vandalism protection locks
- Vital Information Management System (VIMS):
– Includes VIMS Payload Monitor with max payload and speed manager - Hydraulic filters, 1,000 hour
- SOS℠ sample ports
- Service points, ground level
- Sight level gauges for hydraulic/engine oil
-
- Antifreeze
-
- Extended Life Coolant to –35° C (–30° F)
Attachments
-
- Optional Equipment
-
- Cat Detect System
- Cabin air precleaner
- Throttle lock
- Engine delay shutdown timer
- Antifreeze/coolant protects to –50° C (–58° F)
- Fuel tank (7570 L/2,000 gal)
- SL-V grease injectors
- Body heat
- Rear axle lubrication cooler
- External digital payload display
- Oil renewal system
- Oil renewal system with 3 day tank
- Engine coolant and oil heater for cold weather starts
- Road Analysis Control (RAC)
- Portable fire extinguisher
- Torque converter guard
- Brake wear indicator gauge
- Rims (wedge)
- Rim guard