Product Specs
Engine
- Engine Model
- C15 Cat
- Net Power
- 405 hp
- Net Power - Direct Drive - Torque Rise
- 33%
- Net Power - Converter Drive - Torque Rise
- 8,5%
- Maximum Altitude - Without Derating (Tier 3 Final/Stage IIIA Equivalent)
- 9098 ft
- Emissions
- Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
- High Idle Speed
- 2300 r/min
- Low Idle Speed
- 800 r/min
- Maximum Altitude - Without Derating (Tier 4 Final/Stage IV)
- 9298 ft
- Maximum Net Torque - 1,300 rpm
- 1478.8 lb/ft
- Net Power - Converter Drive - Gross Power
- 435 hp
- Net Power - Direct Drive - Gross Power
- 412 hp
- Rated Power (Net ISO 9249)
- 405 hp
- Rated Power (Net SAE J1349)
- 405 hp
- Stroke
- 6.7 in
- Gross Power
- 435 hp
- Bore
- 5.4 in
- Displacement
- 927.6 in³
Operating Specifications
- Operating Weight
- 78326 lb
- Operating Weight - Tier 4 Final/Stage IV
- 78326 lb
- Operating Weight - Tier 3 Final/Stage IIIA Equivalent
- 77340 lb
Transmission
- Travel Speeds - Forward - Third
- 10.7 mile/h
- Travel Speeds - Reverse - Third
- 12.2 mile/h
- Transmission Type
- Planetengetriebe ? Lastschaltgetriebe ? ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
- Travel Speeds - Forward - First
- 3.4 mile/h
- Travel Speeds - Forward - Second
- 6 mile/h
- Travel Speeds - Reverse - First
- 3.9 mile/h
- Travel Speeds - Reverse - Second
- 6.9 mile/h
Hydraulic System
- Pump Flow at 1,800 rpm
- 30.9 gal/min
- Cylinders, Double Acting - Lift, Bore and Stroke
- 120 mm ? 1070 mm (4.7 in ? 42.1 in)
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 95.25 mm ? 216 mm (3.75 in ? 8.5 in)
- Main Relief Pressure
- 3495 psi
- Maximum Supply Pressure
- 3495 psi
Hydraulic System - Steering
- Vehicle Articulation Angle
- 86 degrees
- Bore
- 4.5 in
- Maximum System Flow
- 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
- Steering Pressure Limited
- 3481 psi
- Steering System - Circuit
- Double Acting ? End Mounted
- Steering System - Pump
- Piston ? Variable Displacement
- Stroke
- 22.7 in
Blades
- Height - Including Cutting Edge
- 3.4 ft
- Blade Tip Angle - Total
- 14,8?
- Blade Tip Angle - Forward
- 7,3?
- Blade Tip Angle - Back
- 7,5?
- Blade Tilt Angle - Right - Mechanical
- 5,1?
- Blade Tilt Angle - Left - Mechanical
- 4,1?
- Blade Tilt Angle - Right - Hydraulic
- 6,3?
- Blade Tilt Angle - Left - Hydraulic
- 5,4?
- Total Tilt Adjustment
- 2.9 ft
- Blade Tilt Angle - Left Full
- 10,1?
- Blade Tilt Angle - Right Full
- 10,8?
- Maximum Depth of Cut
- 1.97 ft
- Maximum Lift Above Ground
- 3.14 ft
- Moldboard - Length
- 14.4 ft
- Width - Over End Bits
- 15.18 ft
Wheels
- Weight
- 16167 lb
- Outside Diameter
- 5.5 ft
- Drum Diameter
- 4.3 ft
- Drum Width
- 3.7 ft
- Tips per Wheel
- 65
- Width - Over Drums
- 11.98 ft
Dimensions (Approximate)
- Turning Radius - Inside of Push Arms
- 8.6 ft
- Centerline of Rear Axle to Edge of Counterweight
- 9.3 ft
- Ground Clearance
- 1.6 ft
- Ground Clearance - Bumper
- 2.7 ft
- Height - ROPS/Canopy
- 13.3 ft
- Height - Top of Beacon
- 14.4 ft
- Height - Top of Exhaust Pipe
- 14.1 ft
- Height - Top of Hood
- 10.4 ft
- Hitch to Centerline of Front Axle
- 6.1 ft
- Length - With Blade on Ground
- 28.1 ft
- Wheel Base
- 12.1 ft
- Width - Over Wheels
- 11.98 ft
Axles
- Front
- Planetary ? Fixed
- Oscillation Angle
- ?8?
- Rear
- Planetary ? Oscillating
Braking System
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
Cab - Standard
- Machine Sound Level (ISO 6395)
- 113 dB(A)
- Operator Sound Level - ISO 6396
- 73 dB(A)
Cab - Suppression
- Machine Sound Level (ISO 6395)
- 110 dB(A)
- Operator Sound Level - ISO 6396
- 72 dB(A)
Service Refill Capacities
- Cooling System
- 30.6 gal (US)
- Engine Crankcase
- 9 gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV)
- 8.5 gal (US)
- Differential - Final Drives - Front
- 26.4 gal (US)
- Differential - Final Drives - Rear
- 29.1 gal (US)
- Fuel Tank
- 206.6 gal (US)
- Hydraulic Tank Only
- 35.4 gal (US)
- Transmission
- 17.4 gal (US)
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Air to air aftercooler
- Autoshift
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C15: – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Hydraulically driven demand fan
- Integrated braking system
- Muffler (under hood) (Tier 3/Stage IIIA equivalent)
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Single Clutch Speed Shifting (SCSS)
- Starting aid (ether) automatic
- Throttle lock
- Torque converter with Lock Up Clutch (LUC)
- Transmission, planetary, with 3F/3R speed range control
-
- Electrical
-
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free (4 – 1,000 CCA)
- Electrical system, 24V
- Ground level lockable master disconnect switch
- Light, warning unswitched (LED strobe)
- Lighting, access stairway
- Lighting, under hood
- Lighting system, halogen (front and rear)
- Lights, directional (rear)
- Starter, electric (heavy duty)
- Starting receptacle for emergency start
-
- Operator Environment
-
- 12V power port for mobile phone or laptop connection
- AccuGrade™ mapping (ready)
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Compaction control (ready)
- Coat and hard hat hooks
- Electro-hydraulic tilt and lift controls
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Internal four-post rollover protective structure (ROPS/FOPS)
- Laminated glass
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, heated ready
- Mirrors, rearview (externally mounted)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Seat, Cat Comfort (cloth) air suspension
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
- Wet-arm wipers/washers (front and rear)
- Intermittent wipers (front and rear)
-
- Tires, Rims And Wheels
-
- Wheels, tamping tips
-
- Guards
-
- Guard, driveshaft
- Guards, crankcase and power train
-
- Blades
-
- Bulldozer straight blade, hydraulics, and linkage are included in the base machine
-
- Fluids
-
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
-
- Other Standard Equipment
-
- Cleaner bars with teeth
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
- Fast fuel system
- Fire suppression ready
- Fuel tank, Fast Fill, 782 L (207 gal)
- Hitch, drawbar with pin
- Hoses, Cat
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Product Link
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
- Fold down exhaust stack for shipping
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Camera, rear vision
- Radio, AM/FM/AUX/USB/BLUETOOTH
- Radio, CB (ready)
-
- Technology Products
-
- Compaction control, basic
-
- Fluids
-
- Antifreeze, –50° C (–58° F)
-
- Starting Aids
-
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
-
- Miscellaneous
-
- Film (ANSI) (Tier 4 Final/Stage IV)
- EU certification (Tier 4 Final/Stage IV)
- Plate – year of manufacture (Tier 3/Stage III Equivalent)