Product Specs
Engine
- Engine Model
- Cat C4.4
- Power - Net
- 104 hp
- Displacement
- 269 in³
- Bore
- 4.13 in
- Stroke
- 5 in
- Net Power - 2,200 rpm - SAE J1349
- 104 hp
- Note
- Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 104 hp
Weights
- Operating Weight - XL
- 20313 lb
- Operating Weight - LGP
- 20992 lb
- Operating Weight - LGP, 762 mm/30 in
- 21442 lb
- Note
- Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Transmission
- Drive Pumps
- 1
- Track Motors
- 2
- Relief Valve Settings
- 7033 psi
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Maximum Travel Speed - Reverse
- 6.2 mile/h
Hydraulic Controls
- Pump Output
- 17.7 gal/min
- Relief Valve Settings
- 2988 psi
Winch
- Weight
- 1345 lb
- Winch Drive
- Hydrostatic
- Control
- Hydraulic
- Speed
- Variable
- Winch Length
- 27.76 in
- Overall Width
- 29.2 in
- Drum Diameter
- 10 in
- Drum Width
- 10.8 in
- Throat Clearance
- 6.75 in
- Rope Diameter - Recommended
- 0.63 in
- Rope Diameter - Optional
- 0.75 in
- Drum Capacity - Recommended Cable
- 371 ft
- Drum Capacity - Optional Cable
- 256 ft
- Maximum Line Pull - Bare Drum
- 40000 lb
- Maximum Line Pull - Full Drum
- 25000 lb
- Maximum Line Speed - Bare Drum
- 131 ft/min
- Maximum Line Speed - Full Drum
- 207 ft/min
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1222 lb
- Maximum Digging Depth
- 13.3 in
- Maximum Reach - Ground Line
- 21.9 in
- Maximum Ground Clearance Under Tip
- 17.6 in
- Overall Width
- 67.3 in
Service Refill Capacities
- Crankcase - With Filter
- 2.91 gal (US)
- Final Drive - Each - XL
- 2.6 gal (US)
- Final Drive - Each - LGP
- 2.6 gal (US)
- Transmission - Hydraulic Tank
- 15.7 gal (US)
- Cooling System
- 5.92 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
Undercarriage
- Shoe Width - XL
- 20 in
- Shoe Width - LGP
- 26 in
- Length - Track on Ground - XL
- 91 in
- Length - Track on Ground - LGP
- 91 in
- Track Gauge - XL
- 63 in
- Track Gauge - LGP
- 69 in
- Ground Contact Area - XL
- 3652 in²
- Ground Contact Area - LGP
- 4726 in²
- Ground Pressure - XL
- 5.6 psi
- Ground Pressure - LGP
- 4.5 psi
- Ground Contact Area - LGP, 762 mm (30 in)
- 5514 in²
- Ground Pressure - LGP, 762 mm (30 in)
- 3.93 psi
- Shoe Width - LGP, 762 mm (30 in)
- 30 in
- Track Gauge - LGP, 762 mm (30 in)
- 73.2 in
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 40
- Number of Shoes - Each Side - SystemOne Undercarriage
- 36
- Length - Track on Ground - LGP, 762 mm (30 in)
- 91 in
- Number of Rollers - Each Side
- 7
Cab
- Sound Levels - ISO 6396:2008
- 79 dB(A)
- Sound Levels - SAE J1166 FEB2008
- 79 dB(A)
- FOPS
- ISO 3449:2005 Level II
- ROPS
- ISO 6396:2008
Dimensions
- Track Gauge - XL
- 63 in
- Track Gauge - LGP
- 68.9 in
- Track Gauge - LGP, 770 mm (30 in)
- 73.2 in
- Width - Tractor - Standard Shoes - No Blade - XL
- 83.1 in
- Width - Tractor - Standard Shoes - No Blade - LGP
- 94.9 in
- Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in)
- 103.5 in
- Overall Length - With Blade - XL
- 170.1 in
- Overall Length - With Blade - LGP
- 169.1 in
- Overall Length - With Blade - LGP, 770 mm (30 in) Shoes
- 169.1 in
- Length - Basic Tractor - Without Blade - XL
- 128.5 in
- Length - Basic Tractor - Without Blade - LGP
- 128.5 in
- Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes
- 128.5 in
- Tractor Height - XL
- 109 in
- Tractor Height - LGP
- 109 in
- Tractor Height - LGP, 770 mm (30 in)
- 109 in
- Ground Clearance - XL
- 13 in
- Ground Clearance - LGP
- 13 in
- Ground Clearance - LGP, 770 mm (30 in) Shoes
- 13 in
- BLADE: Blade Width - XL
- 109.5 in
- BLADE: Blade Width - Intermediate
- 115 in
- BLADE: Blade Width - LGP
- 126.7 in
- BLADE: Blade Height - XL
- 42.2 in
- BLADE: Blade Height - Intermediate
- 39.8 in
- BLADE: Blade Height - LGP
- 39.8 in
- BLADE: Blade Lift Height - XL
- 30.2 in
- BLADE: Blade Lift Height - Intermediate
- 30.2 in
- BLADE: Blade Lift Height - LGP
- 30.2 in
- BLADE: Digging Depth - XL
- 23.1 in
- BLADE: Digging Depth - Intermediate
- 22.5 in
- BLADE: Digging Depth - LGP
- 22.5 in
- BLADE: Blade Cutting Edge Angle, Adjustable - XL
- 52° to 58°
- BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate
- 52° to 58°
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Maximum Tilt - XL
- 15.8 in
- BLADE: Maximum Tilt - Intermediate
- 17.6 in
- BLADE: Maximum Tilt - LGP
- 17.6 in
- BLADE: Maximum Angle (either side) - XL
- 25°
- BLADE: Maximum Angle (either side) - Intermediate
- 25°
- BLADE: Maximum Angle (either side) - LGP
- 25°
- BLADE: Blade Width at Maximum Angle - XL
- 103.8 in
- BLADE: Blade Width at Maximum Angle - Intermediate
- 105.1 in
- BLADE: Blade Width at Maximum Angle - LGP
- 115.8 in
- BLADE: Blade Capacity (SAE) - XL
- 2.86 yd³
- BLADE: Blade Capacity (SAE) - Intermediate
- 2.73 yd³
- BLADE: Blade Capacity (SAE) - LGP
- 3.06 yd³
Standard Equipment
-
- Electrical
-
- Alternator, 12 volt, 120 Amp, heavy duty brushless
- Alarm, backup
- Batteries (2), heavy duty, maintenance free, 2,000 CCA
- Diagnostic connector
- Horn, electric
- Lights, halogen, 2 front and 2 rear
- Starter, electric, 12 volt
-
- Operator Station
-
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, retractable 76 mm (3 in)
- Foot pads, dash
- Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
- Slope Indicate
- Throttle switch, rotary
- Eco mode
- Controls, seat mounted, fore/aft adjustment
- Armrests, adjustable
- Mirror, rearview, inside
- Single pedal combining deceleration and braking functions
- Independent forward/reverse speed settings
- Power port, 12 volt
- Coat hook
- Storage compartment
- Cup holder
- Floor mat, rubber, heavy duty
-
- Hydraulics
-
- Hydraulics, 3 valve
- Load sensing hydraulics
- Single lever, three function control
- Hydraulic pump and oil
- Stable blade control
-
- Power Train
-
- Cat C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
- Aftercooler, Air-to-Air (ATAAC)
- Aluminum bar plate cooling system (radiator, power train)
- Air cleaner with precleaner, automatic dust ejection and under-hood intake
- Dual path, closed-loop hydrostatic transmission
- Electric fuel priming pump
- Fuel/water separator
- Automatic Traction Control
-
- Undercarriage
-
- SALT Undercarriage
- 7 roller track frame
- Track rollers, lifetime lubricated
- Carrier rollers
- Track adjusters, hydraulic
- Guards, front/rear guiding
- Master link
-
- Other Standard Equipment
-
- Cat Product Link™ PL631 Satellite/PL641 Cellular
- C-Frame, VPAT, hydraulic cylinders and lines
- Lockable engine enclosures
- Front pull device
- Rigid drawbar
- Ecology drains (engine, power train and implement oil and engine coolant)
- Scheduled oil sampling ports (engine, power train implement oil)
- Vandalism protection
- Heavy duty crankcase guard
-
- Antifreeze
-
- Extended life coolant, –37° C (–35° F)
Attachments
-
- Electrical
-
- Integrated four front halogen lights, two rear halogen lights
-
- Power Train
-
- Drive, auxiliary
- Installation, winch
-
- Undercarriage
-
- Track Pairs, XL: – Track, 510 mm (20 in) MS SystemOne
- Track Pairs, LGP: – Track, 660 mm (26 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne
-
- Operator Station
-
- Cab with air conditioning*
- Cab, polycarbonate windows and air conditioning*
- Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
- Radio, AM/FM, Bluetooth
- Sound suppression
- *Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
-
- Hydraulics
-
- Hydraulics, 4 valve for use with ripper
- Hydraulics, 4 valve for use with winch
-
- Guards
-
- Guard, rear, heavy duty
- Grill, radiator, heavy duty
- Guard, track guiding, center
- Guard, track roller, full length
- Screen, rear, cab
- Screen, side, cab
- Screen, rear, canopy
- Screen, front and doors, canopy
- Sweeps, front
- Sweeps, rear
-
- Blades
-
- VPAT XL blade
- VPAT LGP blade
- VPAT Intermediate blade
-
- Rear Attachments
-
- Drawbar, towing
- Mounting, winch
- Ripper, parallelogram, includes three shanks and teeth
-
- Rear Attachment Control
-
- Control, ripper
- Control, winch
- Control, ripper and winch
-
- Machine Control And Guidance
-
- Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
- Power Pitch blade control
-
- Starting Aids
-
- Heater, engine, coolant, 120 volt
- Starting aid, ether
-
- Other Attachments
-
- Machine Security System
-
- Antifreeze
-
- Extended life coolant, –50° C (–58° F)
-
- Field Installed Attachment
-
- Winch, hydrostatic