1-888-MICH-CAT

816K Landfill Compactor

Request a Quote
Download a Product Brochure

Product Specs

Weights

Operating Weight
56899 lb

Engine

Gross Power
284 hp
Net Power
248 hp
Engine Model
Cat® C7.1: configured for two emissions options
Torque Rise
52 %
Bore
4.1 in
Stroke
5.3 in
Displacement
427.8 in³
Rated Power (SAE J1349) - Tier 4 Final/Stage IV
248 hp
Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV
248 hp
Gross Power - SAE J1995 - Tier 4 Final/Stage IV
284 hp
Gross Power - ISO 14396 - Tier 4 Final/Stage IV
274 hp
Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV
899 lb/ft
Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent
249 hp
Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent
249 hp
Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent
286 hp
Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent
275 hp
Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent
749 lb/ft
Maximum Altitude - Without Derating
9842.52 ft
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
High Idle Speed
2270 r/min
Low Idle Speed
800 r/min

Axles

Front
Planetary – Fixed
Oscillation Angle
±6°
Rear
Planetary – Oscillating

Dimensions (Approximate)

Height - Top of Exhaust Pipe
11.5 ft
Height - Top of Hood
8.9 ft
Ground Clearance - Bumper
2.7 ft
Hitch to Centerline of Front Axle
5.5 ft
Wheel Base
11 ft
Width - Over Wheels
131.4 ft
Height - Top of Beacon
14.3 ft
Centerline of Rear Axle to Bumper
6.5 ft
Overall Length - Maximum
26.4 ft
Height - Cab Roof
12.7 ft
Inside Turn Radius - Wheels
8.9 ft
Inside Turn Radius - Blade
9.5 ft
Outside Turning Radius - Blade
21.2 ft
Ground Clearance
1.7 ft

Transmission

Travel Speeds - Forward - First
3.8 mile/h
Travel Speeds - Forward - Second
6.8 mile/h
Travel Speeds - Reverse - First
4.3 mile/h
Travel Speeds - Reverse - Second
7.8 mile/h
Transmission Type
Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)

Hydraulic System

Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 915 mm (4.7 in × 36.0 in)
Main Relief Pressure
3190 psi
Maximum Supply Pressure
2930 psi
Pump Flow at 2,111 rpm
23.5 gal/min

Service Refill Capacities

Cooling System - Tier 4 Final/Stage IV
21.4 gal (US)
Differential - Final Drives - Front
11.4 gal (US)
Differential - Final Drives - Rear
11.4 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only)
4.2 gal (US)
Hydraulic Tank Only
19.8 gal (US)
Cooling System - Tier 3/Stage IIIA Equivalent
19.3 gal (US)
Engine Crankcase
5.28 gal (US)
Fuel Tank
132.1 gal (US)
Transmission
14.8 gal (US)
Note
All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (

Hydraulic System - Steering

Steering Pressure Limited
4003 psi
Bore
4 in
Maximum System Flow
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Steering System - Circuit
Closed Center Load Sensing
Steering System - Pump
Piston – Variable Displacement
Stroke
23.5 in
Vehicle Articulation Angle
84 °

Operating Specifications

Maximum Operating Weight (Tier 4 Final/Stage IV)
56899 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
56308 lb

Cab - Standard

Operator Sound Level - ISO 6396
71 dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV
111 dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent
112 dB(A)

Cab - Suppression

Operator Sound Level - ISO 6396
70 dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV
109 dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent
110 dB(A)

Blades

Width - Moldboard Length
11.75 ft
Height - Including Cutting Edge and Screen
6.4 ft
Maximum Depth of Cut
1.2 ft
Maximum Lift Above Ground
3.7 ft
Width - Over End Bits
12 ft

Wheels

Paddle Tips - Weight (Group)
13126 lb
Paddle Tips - Outside Diameter
67.6 in
Paddle Tips - Drum Diameter
55.1 in
Paddle Tips - Drum Width
40 in
Paddle Tips - Tips per Row
5
Paddle Tips - Tips per Wheel
20
Paddle Tips - Replaceable
Welded
Paddle Tips - Width over Drums
131.4 in
Paddle Tips - Tip Height
6.25 in
Plus Tips - Weight (Group)
13982 lb
Plus Tips - Outside Diameter
67.6 in
Plus Tips - Drum Diameter
55.1 in
Plus Tips - Drum Width
40 in
Plus Tips - Tips per Row
5
Plus Tips - Tips per Wheel
20
Plus Tips - Replaceable
Welded
Plus Tips - Width over Drums
131.4 in
Plus Tips - Tip Height
6.25 in
Combo Wheels - Weight (Group)
13554 lb
Combo Wheels - Outside Diameter
67.6 in
Combo Wheels - Drum Diameter
55.1 in
Combo Wheels - Drum Width
40 in
Combo Wheels - Tips per Row
5
Combo Wheels - Tips per Wheel
20
Combo Wheels - Replaceable
Welded
Combo Wheels - Width over Drums
131.4 in
Combo Wheels - Tip Height
6.25 in

Braking System

Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released

Standard Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Advanced Productivity Electronic Control Shifting (APECS)
    • Air to air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat clean emission module (Tier 4 Final/Stage IV only)
    • Electro-hydraulic parking brake
    • Electronic Clutch Pressure Control (ECPC)
    • Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
    • Engine driven cooling fan (suction)
    • Fuel priming pump (electric)
    • Fuel to air cooler
    • Ground level engine shutoff
    • Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
    • Radiator, unit core
    • Starting aid (ether)
    • Throttle lock
    • Transmission, planetary with 2F/2R speed range control
    • Torque converter
  • Electrical
    • Alarm, back-up
    • Alternator (150 amp)
    • Batteries, maintenance free
    • Electrical system (24 volt)
    • Ground level lockable master disconnect switch
    • Light, warning unswitched (LED strobe)
    • Lighting system (front and rear)
    • Starter, electric
    • Starting receptacle for emergency start
  • Operator Environment
    • 12-volt power port for mobile phone or laptop connection
    • AccuGrade™ mapping (ready)
    • Air conditioner with roof mounted condenser
    • Cab, sound-suppressed pressurized
    • Camera, rear vision
    • Coat and hard hat hooks
    • Finger tip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Hydraulic controls – floor mounted
    • Implement hydraulic lockout
    • Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque convertor temperature
    • Instrumentation, warning indicators: – Action alert system, three category – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Light, (dome) cab
    • Lunch box and beverage holders
    • Mirror, internal (panoramic)
    • Mirrors, rearview (externally mounted)
    • Radio, CB ready
    • Radio ready for entertainment: – Antenna – Speakers – Converter (12-volt 10-15 amp)
    • Seat belt with minder, retractable, 76 mm (3") wide
    • STIC control system with lockout
    • Sun visor, front
    • Tinted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
    • Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
  • Guards
    • Guards, axle (front and rear)
    • Guard, cab window
    • Guards, crankcase and power train, hinged
    • Guard, driveshaft
    • Guard, radiator
    • Striker bars
  • Fluids
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • Other Standard Equipment
    • DEF tank fill gauge (Tier 4 Final/Stage IV only)
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Emergency egress
    • Fire suppression ready
    • Fuel tank, 500 L (132 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Hydraulic, engine, and transmission oil coolers
    • Oil change system, high speed
    • Oil sampling valves
    • Steering, load sensing
    • Total hydraulic filtration system
    • Vandalism protection caplocks
    • Venturi stack
  • Standard Attachments – Operator Environment
    • Glass (window): – Standard bonded or rubber-mounted glass
    • Horn group (standard)
    • Horn group (trumpet)
    • Lights – cab: – Standard or LED
    • Mirrors – cab: – Standard or heated
    • Precleaner – cab: – Standard or powered
    • Seat – cab: – Standard or heated and ventilated
  • Standard Attachments – Power Train
    • Axles: – Axle arrangement (no spin front) – Axle arrangement (no spin rear) – Axle arrangement (no spin front and rear)
  • Standard Attachments – Special Arrangements
    • Engine precleaners: – Turbine or dual stage
  • Standard Attachments – Blades
    • Dozer Arrangement – Standard (No Blade)
    • Dozer Arrangement – Straight Blade
    • Dozer Arrangement – Tilt (No Blade)
  • Standard Attachments – Technology Products
    • Product Link: – GSM, satellite
  • Standard Attachments – Wheels And Cleaner Bars
    • Wheels and tips: – Wheel arrangement (6.25" plus tip) – Wheel arrangement (6.25" paddle tip) – Wheel arrangement (6.25" plus and paddle) – Wheels, chopper
    • Bar group – cleaner (cleaner fingers and striker bar)

Attachments

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Radio, AM/FM/AUX/USB/BLUETOOTH
  • Fluids
    • Antifreeze, –50° C (–58° F)
  • Special Arrangements
    • Engine: – Sound suppression
  • Starting Aids
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
  • Miscellaneous
    • Film (ANSI) (Tier 4 Final/Stage IV only)
    • EU certification (Tier 4 Final/Stage IV only)
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)

Pin It on Pinterest

Share This