Product Specs
Engine
- Engine Model
- Cat® C7.1: configured for two emissions options
- Net Power
- 248 hp
- Bore
- 4.1 in
- Stroke
- 5.3 in
- Displacement
- 427.8 in³
- Torque Rise - Tier 4 Final/Stage IV
- 52%
- Torque Rise - Tier 3/Stage IIIA Equivalent
- 26%
- Emissions
- Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
- Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent
- 275 hp
- Gross Power - ISO 14396 - Tier 4 Final/Stage IV
- 274 hp
- Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent
- 286 hp
- Gross Power - SAE J1995 - Tier 4 Final/Stage IV
- 284 hp
- Maximum Altitude - Without Derating
- 9842.52 ft
- Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent
- 749 lb/ft
- Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV
- 899 lb/ft
- Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent
- 249 hp
- Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV
- 248 hp
- Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent
- 249 hp
- Rated Power (SAE J1349) - Tier 4 Final/Stage IV
- 248 hp
- High Idle Speed
- 2270 r/min
- Low Idle Speed
- 800 r/min
Wheels
- Drum Width
- 3.25 ft
- Drum Diameter
- 3.38 ft
- Outside Diameter
- 4.63 ft
- Tips per Wheel
- 60
- Weight
- 9720 lb
- Width - Over Drums
- 10.64 ft
Axles
- Front
- Planetary – Fixed
- Rear
- Planetary – Oscillating
- Oscillation Angle
- ±10 درجة
Blades
- Maximum Depth of Cut
- 0.73 ft
- Maximum Lift Above Ground
- 2.63 ft
- Total Tilt Adjustment
- 2.14 ft
- Width - Over End Bits
- 12.34 ft
- Height - Including Cutting Edge
- 2.82 ft
- Blade Tilt Angle - Right - Hydraulic
- 4,8°
- Blade Tilt Angle - Left - Hydraulic
- 5,5°
- Blade Tilt Adjustment - Right
- 1 ft
- Blade Tilt Adjustment - Left
- 1.14 ft
- Width - Moldboard Length
- 11.98 ft
Service Refill Capacities
- Engine Crankcase
- 5.3 gal (US)
- Cooling System - Tier 3/Stage IIIA Equivalent
- 19.3 gal (US)
- Cooling System - Tier 4 Final/Stage IV
- 21.4 gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only)
- 4.2 gal (US)
- Differential - Final Drives - Front
- 17.2 gal (US)
- Differential - Final Drives - Rear
- 17.2 gal (US)
- Fuel Tank
- 132.1 gal (US)
- Hydraulic Tank Only
- 19.8 gal (US)
- Note
- All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EP
- Transmission
- 14.8 gal (US)
Transmission
- Travel Speeds - Forward - Third
- 13.2 mile/h
- Travel Speeds - Reverse - Third
- 15 mile/h
- Transmission Type
- Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
- Travel Speeds - Forward - First
- 4.2 mile/h
- Travel Speeds - Forward - Second
- 7.5 mile/h
- Travel Speeds - Reverse - First
- 4.8 mile/h
- Travel Speeds - Reverse - Second
- 8.5 mile/h
Operating Specifications
- Operating Weight
- 49353 lb
- Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
- 48740 lb
- Maximum Operating Weight (Tier 4 Final/Stage IV)
- 49353 lb
Hydraulic System
- Lift Cylinder, Double Acting - Bore and Stroke
- 101.6 mm × 627 mm (4 in × 24.7 in)
- Tilt Cylinder, Double Acting - Bore and Stroke
- 101.6 mm × 167 mm (4 in × 6.6 in)
- Main Relief Pressure
- 3190 psi
- Maximum Supply Pressure
- 2930 psi
- Pump Flow at 2,111 rpm
- 23.5 gal/min
Cab - Standard
- Machine Sound Level (ISO 6395) Tier 4/Stage IV
- 111 dB(A)
- Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent
- 112 dB(A)
- Operator Sound Level - ISO 6396
- 71 dB(A)
Hydraulic System - Steering
- Vehicle Articulation Angle
- 84 degrees
- Bore
- 4 in
- Maximum System Flow
- 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
- Steering Pressure Limited
- 4003 psi
- Steering System - Circuit
- Closed Center Load Sensing
- Steering System - Pump
- Piston – Variable Displacement
- Stroke
- 23.5 in
Braking System
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
Cab - Suppression
- Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent
- 110 dB(A)
- Operator Sound Level - ISO 6396
- 70 dB(A)
- Machine Sound Level (ISO 6395) Tier 4/Stage IV
- 109 dB(A)
Dimensions (Approximate)
- Centerline of Rear Axle to Bumper
- 6.53 ft
- Ground Clearance
- 1.23 ft
- Height - Top of Cab Roof
- 11.98 ft
- Height - Top of Beacon
- 12.95 ft
- Turning Radius - Inside of Push Arms
- 8.27 ft
- Height - Top of Exhaust Pipe
- 10.97 ft
- Height - Top of Hood
- 8.42 ft
- Hitch to Centerline of Front Axle
- 5.5 ft
- Length - With Blade on Ground
- 23.48 ft
- Wheel Base
- 10.99 ft
- Width - Over Wheels
- 10.64 ft
- Ground Clearance - Bumper
- 2.18 ft
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Advanced Productivity Electronic Control System (APECS)
- Air to air aftercooler
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV only)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
- Engine driven cooling fan – suction
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
- Radiator, unit core
- Starting aid (ether)
- Throttle lock
- Torque converter
- Transmission, planetary, with 3F/3R speed range control
-
- Electrical
-
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free
- Electrical system, 24V
- Ground level lockable master disconnect switch
- Lights, directional (rear)
- Light, warning switched (LED strobe)
- Lighting system, (front and rear)
- Starter, electric
- Starting receptacle for emergency start
-
- Operator Environment
-
- 12V power port for mobile phone or laptop connection
- AccuGrade™ mapping (ready)
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Cat Compaction Control (ready)
- Cat Detect: Object Detection (ready)
- Coat and hard hat hooks
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Hydraulic controls – seat mounted
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, rearview (externally mounted)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Seat, Cat Comfort (cloth) air suspension
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
-
- Tires, Rims And Wheels
-
- Wheels, tamping foot
-
- Guards
-
- Cleaner bars with teeth
- Guards, crankcase and power train
- Guard, driveshaft
-
- Fluids
-
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
-
- Other Standard Equipment
-
- DEF tank fill gauge
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Emergency platform egress
- Fire suppression ready
- Fuel tank, 500 L (132.1 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Steering, load sensing
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
-
- Standard Attachments – Hydraulics
-
- Hydraulics: – Standard or EU and Canada
-
- Standard Attachments – Operator Environment
-
- Glass (window): – Standard bonded or rubber-mounted glass
- Precleaner – cab: – Standard or powered
- Seat – cab: – Standard or heated and ventilated
- Mirrors – cab: – Standard or heated
-
- Standard Attachments – Power Train
-
- Axles: – Standard or non-spin rear
-
- Standard Attachments – Special Arrangements
-
- Engine Precleaners: – Turbine or dual stage
-
- Standard Attachments – Electrical
-
- Lights: – Standard or LED
-
- Standard Attachments – Fuel Systems
-
- Fuel tank: – Non-fast or fast fill
-
- Standard Attachments – Technology Products
-
- Product Link: – GSM, satellite
-
- Standard Attachments – Cleaner Bars
-
- Cleaner bars: – Standard or abrasive
-
- Standard Attachments – Blades
-
- Blades: – Straight or tilt-straight
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Camera, rear vision
- Radio, AM/FM/AUX/USB/BLUETOOTH
- Radio, CB (ready)
-
- Technology Products
-
- Compaction control, basic
-
- Other Attachments
-
- Sound suppression (required for Brazil)
-
- Fluids
-
- Antifreeze, –50° C (–58° F)
-
- Starting Aids
-
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
-
- Miscellaneous
-
- Film (ANSI) (Tier 4 Final/Stage IV only)
- EU certification (Tier 4 Final/Stage IV only)
- Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)