Exterior View
Product Specs
General Specifications
- Maximum Rating
- 580 BHP
- Displacement
- 927.6 in³
- Minimum Rating
- 475 BHP
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 0 or 1
- Flywheel Teeth
- 136 (SAE 0), 113 (SAE 1)
- Stroke
- 6.73 in
- Bore
- 5.39 in
Emissions
- Emissions
- EPA Tier 4 Final and EU Stage IV
Dimensions
- Length
- 56.6 in
- Width
- 38.1 in
- Height
- 49.1 in
- Weight
- 3395.5 lb
Standard Equipment
-
- Control System
-
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
-
- Cooling System
-
- Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available through your dealer to ensure equipment reliability. Available cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
-
- Exhaust System
-
- Mid-mount turbocharged system with front and rear exhaust configurations
-
- Flywheels And Flywheel Housing
-
- SAE No. 0 and SAE No. 1 flywheel housings; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
-
- Fuel System
-
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
- Lube System
-
- Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
-
- General
-
- Paint: Cat yellow