Product Specs
Engine Specifications
- Maximum Rating
- 637 BHP
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 1649 in³
- Minimum Rating
- 637 BHP
- Compression Ratio
- 8.5:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Weight - Dry
- 4720 lb
- Oil Change Interval
- 750 hours
- Ignition, Protection
- Cat EIS
- Stroke
- 6 in
- Bore
- 5.4 in
Capacity for Liquids
- Cooling System
- 14.5 gal (US)
- Lube Oil System - Refill
- 45 gal (US)
Standard Equipment
-
- Air Inlet System
-
- Air cleaner — single element with service indicator
-
- Control System
-
- Electronic governor
- Air/fuel ratio control on 1.0 g/bhp-hr NOx engines
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
- Exhaust System
-
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
- Flywheels & Flywheel Housings
-
- SAE No. 0 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Gas pressure regulator (1.5 to 5 psi gas supply required)
- Natural gas carburetor
-
- Ignition System
-
- Cat Electronic Ignition System (EIS) with detonationsensitive timing
-
- Instrumentation
-
- Service meter
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil pan — deep sump
- Oil filler — RH in valve cover and RH dipstick
-
- Mounting System
-
- Engine supports
-
- Protection System
-
- Detonation sensitive timing control
- Shutoff
-
- General
-
- Paint — Cat yellow
- Crankshaft vibration damper and pulleys
- Lifting eyes
Attachments
-
- Air Inlet System
-
- Air cleaner — two-stage
- Air inlet adapter
- Precleaner
- Air cleaner rain cap
-
- Charging System
-
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
- Control mounting
-
- Cooling System
-
- Radiators
- Blower fan and fan drives for customer suppliedradiators
- Expansion tank
- Heat exchangers
-
- Exhaust System
-
- Flexible fittings
- Elbows
- Flanges
- Rain caps
- Mufflers
-
- Fuel System
-
- Dual gas regulator
- Carburetor kits
- Fuel filter
-
- Ignition System
-
- CSA ignition
- Ignition ground wiring harness
- Power supply
-
- Instrumentation
-
- Alarm module
- Gauges and instrument panels
-
- Mounting System
-
- Vibration isolators
-
- Power Take-offs
-
- Auxiliary drive pulleys
- Enclosed clutch and clutch support
- Front stub shaft
- Flywheel stub shaft
- Pulley removal
-
- Protection System
-
- Gas valves
- Status control box interconnect wiring harness
-
- Starting System
-
- Air starting motor — electric air start control
- Air pressure regulator
- Air silencer
- Electric starting motors — single 24-volt
- Starting aids
- Battery sets
-
- General
-
- Special paint