Exterior View
Product Specs
Engine
- Engine Model
- Cat® 3516E
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
- Engine Power - ISO 14396:2002
- 1847 hp
- Gross Power - SAE J1995:2014
- 1870 hp
- Net Power - SAE J1349 - Standard Ambient
- 1739 hp
- Net Power - SAE J1349 - High Ambient
- 1696 hp
- Bore
- 6.7 in
- Stroke
- 8.5 in
- Displacement
- 4766 in³
- Peak Torque - 1,200 rpm - SAE J1995
- 8549 lb/ft
- Torque Rise
- 39%
- Note (1)
- The power ratings apply when tested under the reference conditions for the specified standard.
- Note (2)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
- Note (3)
- The gross power advertised is with the fan at maximum speed.
Operating Specifications
- Operating Weight - Standard
- 543772 lb
- Bucket Capacity Range
- 17.2-43.6 m3 (22.3-57 yd3)
- Operating Weight - High Lift
- 547675 lb
- Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
- 60 ton (US)
- Rated Payload - Standard Lift (Moderate to High Digging Resistance)
- 50 ton (US)
- Rated Payload - High Lift (Low to Moderate Digging Resistance)
- 55 ton (US)
- Rated Payload - High Lift (Moderate to High Digging Resistance)
- 50 ton (US)
- Note
- *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
- Cat Truck Match - Standard
- 785/789
- Cat Truck Match - High Lift
- 789/793/794
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Forward - 1
- 4.6 mile/h
- Forward - 2
- 8 mile/h
- Forward - 3
- 13.6 mile/h
- Reverse - 1
- 5 mile/h
- Reverse - 2
- 8.8 mile/h
- Reverse - 3
- 14.9 mile/h
- Direct Drive - Forward 1
- Lock-up disables
- Direct Drive - Forward 2
- 8.7 mile/h
- Direct Drive - Forward 3
- 15.2 mile/h
- Direct Drive - Reverse 1
- Lock-up disables
- Direct Drive - Reverse 2
- 9.6 mile/h
- Direct Drive - Reverse 3
- 16.8 mile/h
- Note
- Travel speeds based on 58/85-57 tires.
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Positive Flow Control
- Lift/Tilt System - Pump
- Variable Displacement Piston
- Maximum Flow at 1,700 rpm Engine Speed
- 541 gal/min
- Relief Valve Setting - Lift/Tilt
- 5004 psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 370 × 1713 mm (14.6 × 67.4 in)
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 310 × 1086 mm (12.2 × 42.8 in)
- Pilot System
- Open Loop and Pressure Reducing
Hydraulic Cycle Times
- Rack Back
- 4.9 s
- Raise
- 12.6 s
- Dump
- 3.1 s
- Lower Float Down
- 4.2 s
Complete System Fill
- Fuel Tank - Standard
- 856 gal (US)
- Fuel Tank - With 24 hr Attachment
- 1414 gal (US)
- Cooling System
- 138 gal (US)
- Engine Crankcase
- 76 gal (US)
- Transmission
- 110 gal (US)
- Differential - Final Drives - Front
- 220 gal (US)
- Differential - Final Drives - Rear
- 200 gal (US)
- Hydraulic Tank - Implement and Hydraulic Fan
- 270 gal (US)
- Hydraulic Tank - Steering and Braking
- 100 gal (US)
- Oil Renewal System (ORS)*
- 20 gal (US)
- Note
- *Not available on Tier 4 Final/Stage V machines. Not available in all regions.
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 9°
Cooling System
- Ambient Capability Hydraulically Driven Demand Fan - Standard
- 109.4 °F
- Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
- 131 °F
- Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
- 127.4 °F
Sound Performance - Standard
- Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
- 74 dB(A)
- Machine Sound Level (ISO 6395:2008)
- 119 dB(A)
- Note
- The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Sound Performance - Suppression
- Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
- 73 dB(A)
- Machine Sound Level (ISO 6395:2008)
- 117 dB(A)
- Note
- The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston, Variable Displacement
- Total Steering Angle
- 80 degrees
- Steering Cycle Times - Low Idle
- 7.6 s
- Steering Cycle Times - High Idle
- 4.3 s
Dimensions - Standard Lift - Approximate
- B-Pin Height - Maximum Lift
- 28.8 ft
- Clearance at Maximum Lift
- 19.8 ft
- Dump Angle at Maximum Lift
- –50.0 degrees
- Front Axle Centerline to Bucket Tip
- 21.9 ft
- Ground to Bumper Clearance
- 4.4 ft
- Ground to Center of Axles
- 6 ft
- Ground to Lower Hitch Clearance
- 2.9 ft
- Ground to Top of Exhaust Stacks
- 23.2 ft
- Ground to Top of Hood
- 18.6 ft
- Ground to Top of ROPS
- 23.4 ft
- Maximum Overall Height - Bucket Raised
- 39.3 ft
- Maximum Overall Length
- 64.6 ft
- Note
- Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
- Rack Angle at Maximum Lift
- 59.5 degrees
- Rack Back Angle - Carry
- 47.7 degrees
- Rack Back Angle - Ground Level
- 39.7 degrees
- Reach - Maximum Lift
- 9.6 ft
- Rear Axle - Centerline to Bumper
- 20.4 ft
- Tread Width
- 14.1 ft
- Wheel Base
- 22.3 ft
- Width - Over Tires - With Bulge
- 18.8 ft
Dimensions - High Lift - Approximate
- B-Pin Height - Maximum Lift
- 31.6 ft
- Clearance at Maximum Lift
- 22.6 ft
- Dump Angle at Maximum Lift
- –50.0 degrees
- Front Axle Centerline to Bucket Tip
- 24.2 ft
- Ground to Bumper Clearance
- 4.4 ft
- Ground to Center of Axles
- 6 ft
- Ground to Lower Hitch Clearance
- 2.9 ft
- Ground to Top of Exhaust Stacks
- 23.2 ft
- Ground to Top of Hood
- 18.6 ft
- Ground to Top of ROPS
- 23.4 ft
- Maximum Overall Height - Bucket Raised
- 42.1 ft
- Maximum Overall Length
- 66.9 ft
- Note
- Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
- Rack Angle at Maximum Lift
- 59.4 degrees
- Rack Back Angle - Carry
- 53.5 degrees
- Rack Back Angle - Ground Level
- 45 degrees
- Reach - Maximum Lift
- 9.4 ft
- Rear Axle - Centerline to Bumper
- 20.4 ft
- Tread Width
- 14.1 ft
- Wheel Base
- 22.3 ft
- Width - Over Tires - With Bulge
- 18.8 ft
Brakes
- Brakes
- ISO 3450:2011
Standard Equipment
-
- Power Train
-
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground-level engine shutoff
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
-
- Linkage
-
- Standard lift
-
- Electrical
-
- Alternator
- Batteries, low maintenance
- 10/15 amp, 24V to 12V converter
- Disconnect switch to bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
-
- Operator Environment
-
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
- Bonded glass, tinted
- Trainer seat
- Dual-lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information
- Heater, defroster, auto temperature controls
- Powered cab precleaner
- Operator presence status
- Starting/charging system malfunction
- Electronic OMM
- Operator controls help
- Two USB charging ports
- CB mounting, 12V/24V power and antenna
- 14-pin service port
- 12V power
- Selectable application profiles
- Entertainment radio mute
- Push-To-Start (PTS)
- Warning/indicator instrumentation
- Keypad control with indicator lights
- Dome light in cab
- Lunchbox and beverage holders
- Electro-hydraulic force feedback steering
- Vital Information Management System (VIMS™) with information display: external data port, cycle timer
- Coat hook
- Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
-
- Safety
-
- Ground-access ladders
- Rear-vision camera
- Front frame access with steps
- Front walkway around cab
- Pump bay access ladders with T-handle and platform
- Tie-offs on ROPS and radiator guards
- Steering frame lock
- Stairways on both sides of the machine
- LED stairway and access lights
- Toe kicks
- Electric (field and shop) horns
- Retractable seatbelt, 76 mm (3 in) wide
- Trainer seat with lap belt, 76 mm (3 in) wide
- Back-up alarm
- Secondary steering
-
- Machine Control And Guidance
-
- MineStar™ Health ready
- MineStar GUIDE ready
- MineStar Edge ready
-
- Fuel Tank
-
- 12 hour (3240 L/856 gal)
-
- Cooling
-
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
-
- Ground-level Service Center
-
- Service center light
- Implement and cooling fan oil level indicator
- Steering and brake oil level indicator
- Window washer solvent level indicator
- Transmission oil level indicator
- DEF level indicator (if equipped)
- Fuel level indicator
- Engine oil level indicator
- Engine coolant level indicator
- Automatic lubrication system grease tank level indicator
- DEF purge indicator lamp
- Transmission lockout and LED
- Starter lockout and LED
- Heavy-duty battery disconnect switch
- Stairway light switch
- Service lighting switch (if equipped)
- Fuel shutoff engine shutdown switch
- Engine oil fast-fill port
- Transmission oil fast-fill port
- Steering and brake hydraulic oil fast-fill port
- Steering and brake hydraulic oil drain port
- Oil renewal system fast-fill port (if equipped)
- Engine coolant fast-fill port
- DEF fill port (HRC only)
- Implement and cooling fan hydraulic oil fast-fill port
- Implement and cooling hydraulic oil drain port
- Automatic lubrication system grease tank fill port
- 24V jump-start receptacle
- 240V jacket water and engine oil heater plug (if equipped)
- 12V power port
- VIMS key switch
- 14-pin machine data port
-
- Service
-
- EH steering eliminates need for neutralizer adjustment
- In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Pump efficiency monitoring
- Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- High-speed engine oil change system
- Ground-level fast-fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT™ hoses
- Left-side service center
- Oil sampling valves
- Automatic Autolube filling shutoff valve
- Telematics and Cat Electronic Technician service port in bumper
- Air filter remaining useful life sensor
- Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Load-sensing steering
- Supplemental steering system
- Vandalism protection caplocks
- Cooling cleanout service package
- VIMS download and Cat Electronic Technician service port in bumper
- Service lights (engine bay, service center)
- EH steering eliminates need for neutralizer adjustment
-
- Efficiency
-
- On demand throttle, HP Plus, and Enhanced ECO Modes
- Variable displacement implement pumps
- Variable displacement load sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch
Attachments
-
- Power Train
-
- Oil Renewal System (ORS)* (for increased time between oil changes)
-
- Linkage
-
- High lift
-
- Operator Environment
-
- Rubber-mounted, high-impact resistant solar control glass
- Trainer seat with suspension
- Joystick lift and tilt function controls
- Bluetooth®-enabled machine security
- Sun screen, pull down (front and rear)
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
-
- Safety
-
- Powered ground-access stairs
- Cat Detect (Rear Object Detection)
- Wheel chocks
-
- Cold Weather
-
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
- 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors (recommended for below-freezing temperatures)
-
- Machine Control And Guidance
-
- Cat Payload with Overload Prevention
- New Autodig Components:
– Tire slip prevention
– Lift stall prevention
– Tire set - Operator coaching
-
- Fuel Tank
-
- 24 hour (5350 L/1414 gal)
-
- Cooling
-
- High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
-
- Rims And Tires
-
- Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
- Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
- Tires – 58/85-57 84PR L4 (require 47" rims)
-
- Spare Rims
-
- 1194 mm (47") 152 mm (44 × 57) (6") flange
- 1194 mm (47") 127 mm (47 × 57) (5") flange
-
- Service
-
- Product Link™ satellite
- Product Link cellular
- Product Link (dual mode – satellite/cellular)
- Additional service lights (pump bay, front frame and bumper)
-
- Sound
-
- Sound-suppression package