Exterior View
Product Specs
Cutting System
- Milling Width
- 88 in
- Maximum Milling Depth
- 13 in
- Rotor Speeds
- 100 / 109 / 118 rpm
- Number of Bits
- 185
Power Train
- Rated Power
- 636 hp
- Engine
- Cat C18
- Maximum Travel Speed
- 3.7 mile/h
- Maximum Milling Speed
- 328 ft/min
Weights
- Operating Weight
- 74737 lb
- Transport Weight
- 66139 lb
Dimensions
- Operating Length - Conveyor Up
- 47.64 ft
- Operating Width
- 10.2 ft
- Height - Canopy
- 13.29 ft
- Maximum Truck Clearance
- 15.94 ft
- Minimum Right Cutting Radius
- 5.91 ft
- Minimum Left Cutting Radius
- 6.56 ft
- Conveyor Swing
- 60 degrees from center
- Transport Length
- 40.78 ft
- Transport Width
- 8.89 ft
- Transport Height
- 9.84 ft
Service Refill Capacities
- Water Spray System Tank
- 898.2 gal (US)
- Cooling System
- 22.5 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 12.4 gal (US)
- Engine Oil
- 17.2 gal (US)
- Fuel Tank
- 292.7 gal (US)
- Hydraulic Tank
- 29.9 gal (US)
Standard Equipment
-
- Operator Environment
-
- Ground control keypads
- Single high-resolution LCD touchscreen display
- 12-volt power receptacle
-
- Cat Connect Technology
-
- Cat Product Link
- Cat GRADE
-
- Conveyor
-
- Grease tensioner
- Material removal boost feature
-
- Rotor System
-
- Automatic plunge-cut
- Automatic transition feature
- Obstacle jump
- Three cutting speeds
-
- Powertrain
-
- Auto engine idle control
- High capacity cooling system
- Dual propel pumps
- Automatic load control
-
- Hydraulic System
-
- Dual pump hydraulic propel system
- Traction control
-
- Service And Maintenance
-
- Sampling ports for Scheduled Oil Sampling (S·O·S℠)
- Power hood
- Platform-level engine oil dipsticks
- Rotor chamber water spray system
- Air compressor
- Accessory drive system
- 3400 L (898 gal) onboard water tank
- Side water fill valve
-
- Safety And Security
-
- Platform handrails
- Signaling/warning horn
- Wide-dispersion LED work lights
Attachments
-
- Operator Environment
-
- Dual high-resolution LCD touchscreen displays
- Hydraulically folding canopy with LEDs
- Air-ride suspension seats
- Windscreens
-
- Cat Connect Technology
-
- Inboard ski
- Sonic sensor (averaging or string line)
- Ground level grade controls and displays
-
- Conveyor
-
- Dust abatement system
- Remote camera (loading conveyor)
-
- Rotor System
-
- System K Rotor - Course (25 mm)
- System K Rotor - Course (18 mm)
- System K Rotor - Standard (15 mm)
- System K Rotor - Fine (10 mm)
- System K Rotor - Fine (8 mm)
- System K Rotor - Micro (6 mm)
- System H Rotor - Micro (6x2 mm)
- Diamond bits
- Bit bucket trays
- Pneumatic bit removal tool
- Tool holder extractor
- Rotor turning device with pendant control
-
- Powertrain
-
- CE certificate
-
- Hydraulic System
-
- Water tank transfer pump
- Fuel transfer pump
-
- Service And Maintenance
-
- High pressure washdown
- Low pressure washdown
- Additional spray bars
-
- Safety And Security
-
- Perimeter LED strip lights
- Magnetic LED work light
- Warning beacon (fixed or magnetic mount)
- Truck signal lights
- Remote camera (rear, front, magnetic mount)