Exterior View
Product Specs
Engine
- Net Power
- 973 hp
Operating Specifications
- Operating Weight
- 294687 lb
- Cat Truck Match - High Lift
- 777, 785
- Bucket Range
- 12.2-23.7 m3 (16.0-31.0 yd3)
- Cat Truck Match - Standard Lift
- 777
- Operating Weight - Tier 2 Equivalent*
- 294687 lb
- Rated Payload - High Lift
- 27.5 t
- Operating Weight - Tier 4 Final*
- 294687 lb
- Operating Weight*
- 294687 lb
- Rated Payload - Standard Lift
- 30 t
- Note
- * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912).
- Articulation Angle
- 43 °
Buckets
- Bucket Capacities
- 12.2-23.7 m3 (16.0-31.0 yd3)
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Forward - 1
- 4.2 mile/h
- Forward - 2
- 7.4 mile/h
- Forward - 3
- 12.7 mile/h
- Reverse - 1
- 4.7 mile/h
- Reverse - 2
- 8.1 mile/h
- Reverse - 3
- 13.9 mile/h
- Direct Drive - Forward 2
- 8 mile/h
- Direct Drive - Reverse 1
- 4.9 mile/h
- Direct Drive - Reverse 2
- 8.8 mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 3
- 14.1 mile/h
- Direct Drive - Reverse 3
- 15.6 mile/h
- Note
- 50/65-51 BFOR (311-1938), calculated speeds.
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 10 degrees
Service Refill Capacities
- Fuel Tank
- 573.3 gal (US)
- Cooling System
- 80.2 gal (US)
- Crankcase
- 31.7 gal (US)
- Transmission
- 52 gal (US)
- Hydraulic System - Tank Only
- 146 gal (US)
- Differential - Final Drives - Front
- 127.3 gal (US)
- Differential - Final Drives - Rear
- 127.3 gal (US)
- Note
- High Lift configuration.
- Hydraulic System Factory Fill
- 230 gal (US)
Engine - Tier 4 Final
- Note
- Standard ambient cooling.
- Bore
- 5.7 in
- Displacement
- 1959 in³
- Emissions
- U.S. EPA Tier 4 Final
- Engine Model
- Cat® C32 with ACERT™ Technology
- Gross Power - SAE J1995
- 1039 hp
- Net Power - EEC 80/1269
- 973 hp
- Net Power - ISO 14396
- 1024 hp
- Net Power - ISO 9249
- 973 hp
- Net Power - SAE J1349
- 964 hp
- Peak Torque - 1,250 rpm
- 4034 lb/ft
- Rated Speed
- 1800 r/min
- Stroke
- 6.4 in
- Torque Rise
- 33%
Engine - Tier 2 Equivalent
- Note
- Standard ambient cooling.
- Bore
- 5.7 in
- Displacement
- 1959 in³
- Emissions
- U.S. EPA Tier 2 Equivalent
- Engine Model
- Cat C32 with ACERT Technology
- Gross Power - SAE J1995
- 1041 hp
- Net Power - EEC 80/1269
- 973 hp
- Net Power - ISO 14396
- 1024 hp
- Net Power - ISO 9249
- 973 hp
- Net Power - SAE J1349
- 964 hp
- Peak Torque - 1,250 rpm
- 4034 ft-lb
- Rated Speed
- 1800 r/min
- Stroke
- 6.4 in
- Torque Rise
- 33%
Hydraulic System - Lift/Tilt
- Note
- High Lift configuration.
- Lift Cylinder - Bore
- 10.5 in
- Lift Cylinder - Stroke
- 66.2 in
- Lift/Tilt System - Circuit
- Positive Flow Control
- Lift/Tilt System - Pump
- Variable Piston
- Relief Valve Setting - Lift/Tilt
- 4200 psi
- Tilt Cylinder - Bore
- 9.3 in
- Tilt Cylinder - Stroke
- 40.9 in
- Maximum Flow at 1,650 rpm
- 311 gal/min
- Cylinders - Lift/Tilt
- Double-acting
Hydraulic Cycle Times
- Note
- High Lift configuration, calculated speeds.
- Dump
- 1.8 s
- Lower Float Down
- 3.1 s
- Rack Back
- 2.4 s
- Raise
- 9.2 s
- Total Hydraulic Cycle Time
- 17.2 s
- Lower
- 3.8 s
Hydraulic System - Steering
- Relief Valve Setting - Steering
- 5000 psi
- Maximum Flow at 1,985 rpm (6900 kPa/1,000 psi)
- 133 gal/min
- Steering System - Circuit
- Closed
- Steering System - Pump
- Piston, variable displacement
- Total Steering Angle
- 86 °
Sound
- Note (1)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated wi
- Note (2)
- The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Dynamic Operator Sound Pressure Level (ISO 6396:2008)
- 70 dB(A)
- Note (3)
- The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
- Operator Sound Pressure - ANSI/SAE J1166 FEB08
- 72 dB(A)
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain filters
- Demand fan
- Driveline parking brake
- Engine, Cat C32 ACERT
- Fuel priming pump (electric)
- Ground level engine shutoff
- Precleaner, engine air intake (above hood)
- Radiator
- Starting aid, ether, automatic
- Throttle lock, electronic
- Torque converter, Impeller Clutch (ICTC) with Rimpull Control System
- Transmission, planetary powershift, 3F/3R electronic control
-
- Electrical
-
- Alarm, back-up
- Alternator, 150-amp
- Batteries, maintenance free, 4 – 1,400 CCA
- Deutsch terminal connectors
- Diagnostic connector starting and charging system
- Electrical system, 24 volt
- Electronic Service Center
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway
- Starter and charging system, 24V
- Starter receptacle for emergency start
- Starter and transmission lockouts (bumper)
-
- Operator Environment
-
- Advisor Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Air precleaner
- Cab, sound suppressed and pressurized, separate external rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 10-amp) and power port
- Cigar lighter, ashtray
- Coat hook
- Controls, lift and tilt function
- Digital display on center console: – Gear – Ground speed – Machine hours
- Heater, defroster
- Horn, electric
- Instrumentation, gauges: – Coolant temperature – Fuel level – Hydraulic oil temperature – Power train oil temperature – Tachometer
- Light, cab, dome
- Lunchbox, beverage and manual holders
- Mirrors, rearview (externally mounted)
- Rimpull Control System
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat, trainer with lap belt, 76 mm (3 in) wide
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- Transmission gear indicator
- Vital Information Management System (VIMS) with Advisor Display: External Data Port, Customizable Operator Profiles, Cycle Timer, Integrated Payload Control System
- Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers
-
- Other
-
- Automatic bucket leveler
- Automatic lift and lower bucket kickout
- Axle ecology drain
- Bumper service center
- Deluxe filtration
- Emergency platform egress
- Front walkway
- Fuel, fast fill system
- Grouped hydraulic pressure ports
- Guards, crankcase and power train
- Hitch, drawbar with pin
- Implement and steering ecology drains
- Implement lock lever, cab
- Linkage pins, maintenance free
- Oil sampling valves
- Positive Flow Control implement system
- Product Link™
- Rims
- Service center with ground level electrical and fluid connections
- Sight gauges for steering, implement and transmission oil
- Stairway, left and right rear access
- Starter lockout, bumper
- Steering and transmission lock lever, cab
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- –50° C (–58° F) antifreeze
- Engine coolant heater (120V)
- Engine coolant heater (240V)
-
- Electrical
-
- LED warning strobe
- Object detection (radar)
- Power converter
- Rear vision camera
-
- Operator Environment
-
- AM/FM/CD/MP3 radio
- Cab precleaner
- Satellite Sirius radio with bluetooth
- Sun screen
-
- Machine Control And Guidance
-
- Cat Terrain ready
-
- Spare Rims
-
- 40.00×51 spare rim
-
- Miscellaneous Attachments
-
- Axle oscillation limit stop
- Egress, powered rear access
- Rear roading fenders