Product Specs
Engine
- Engine Model
- Cat® C9.3 ACERT™
- Flywheel Power
- 251 hp
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Displacement
- 567 in³
- Note
- Rated power occurs at 1,700 rpm. Maximum power occurs at 1,600 rpm.
- Net Power - Maximum - ISO 9249/SAE J1349
- 251 hp
- Net Power - Rated - ISO 9249/SAE J1349 (DIN)
- 241 hp
- Engine Power - Maximum - ISO 14396
- 266 hp
- Engine Power - Maximum - ISO 14396 (DIN)
- 270 hp
- Engine Power - Maximum - SAE J1995
- 270 hp
- Global Emissions
- Tier 4 Final/Stage IV/Korea Tier 4
- Net Power - Rated - ISO 9249/SAE J1349
- 238 hp
- Net Power - Maximum - ISO 9249/SAE J1349 (DIN)
- 254 hp
Weights
- Operating Weight
- 71455 lb
- Shipping Weight
- 59456 lb
- Note (1)
- Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track and 10% fuel.
- Note (2)
- Operating Weight includes blade, lubricants, coolant, full fuel tank, standard track, striker box and operator.
- Operating Weight - LGP S WHA
- 69478 lb
- Operating Weight - LGP U WHA
- 71455 lb
Undercarriage
- Track Gauge
- 90 in
- Ground Clearance
- 18.6 in
- Number of Rollers - Each Side
- 8
- Number of Shoes - Each Side
- 44
- Type
- Heavy Duty Undercarriage
- Configuration
- LGP
- Grouser Height - MS
- 2.75 in
- Length - Track on Ground - Heavy Duty
- 136 in
- Ground Contact Area (Heavy Duty)
- 9792 in²
- Ground Pressure (Heavy Duty) - ISO 16754
- 6.4 psi
- Pitch
- 8.5 in
- Shoe Width
- 36 in
Standards
- ROPS
- Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
- FOPS
- Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II
- Brakes
- Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008
Bulldozer Specifications - 7S LGP Blade
- Digging Depth
- 24.8 in
- Ground Clearance
- 50.9 in
- Maximum Tilt
- 30.9 in
- Weight*
- 8875 lb
- Note
- *Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).
- Blade Capacity - SAE J1265
- 25 yd³
- Width - Over End Bits
- 15.1 ft
- Height
- 8 ft
Service Refill Capacities
- DEF Tank
- 4.75 gal (US)
- Hydraulic Tank
- 20 gal (US)
- Pivot Shaft Compartment
- 1.8 gal (US)
- Roller Frames - Each
- 11 gal (US)
- Cooling System
- 22.5 gal (US)
- Engine Crankcase
- 8 gal (US)
- Final Drive - Each
- 7 gal (US)
- Fuel Tank
- 113.5 gal (US)
- Power Train
- 16 gal (US)
Bulldozer Specifications - 7U LGP Blade
- Blade Capacity - SAE J1265
- 30 yd³
- Width - Over End Bits
- 15.4 ft
- Height
- 8 ft
- Digging Depth
- 27.3 in
- Ground Clearance
- 52.6 in
- Maximum Tilt
- 30.9 in
- Weight*
- 11645 lb
- Note
- *Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).
Dimensions - LGP - Approximate
- Track Gauge
- 90 in
- Width - Tractor - Over Trunnions
- 135 in
- Width - Tractor - Without Trunnions - Standard Shoes
- 126 in
- Machine Height - Grouser Tip - Top of Stack
- 132 in
- Machine Height - Grouser Tip - Top of Standard Cab
- 134 in
- Machine Height - Grouser Tip - Ground Face of Shoe
- 131 in
- Length - Track on Ground
- 136 in
- Length - Basic Tractor
- 181 in
- Length - Basic Tractor - With Ripper - Tip at Ground Line
- N/A
- Length - Basic Tractor - With Ripper - Tip Fully Raised
- N/A
- Length - Basic Tractor - With Drawbar
- 10.6 in
- Length - Basic Tractor - With S Blade
- 53.5 in
- Length - Basic Tractor - With U Blade
- 76.6 in
- Height - Grouser
- 2.75 in
- Ground Clearance
- 18.6 in
- Ground Contact Area - With Standard Shoes
- 9792 in²
- Number of Shoes - Each Side
- 44
- Standard Shoe Width (Moderate Service)
- 36 in
- Ground Pressure
- 6.4 psi
- Pitch
- 8.5 in
- Track Rollers/Side
- 8
- Number of Carrier Rollers
- 2
- Drawbar Height (Grouser Tip to Center of Clevis)
- 28 in
Drive Train
- AC Compressor Nominal Input Voltage
- 320 V
- AC Compressor Maximum Input Current
- 12 A
- Note
- Nominal current dependent on heat/humidity loading on HVAC unit.
- AC Generator and Propulsion Module Voltage
- 480 V
- Type
- Electric Drive
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg of refrigerant which has a CO2 equivalent 1.716 metric tonnes.
Standard Equipment
-
- Electrical
-
- Accessory Power Converter (APC)
- Alarm, Backup
- Batteries, Heavy Duty
- Converter, 24V to 12V, 10 Amp
- Heater, Engine Coolant, 120V
- Horn, Forward Warning
- Product Link
-
- Operator Environment
-
- Enhanced Clean Cab
- Air Suspension Seat
- Cab Door Screens
- Armrest, Adjustable
- Bidirectional Shift Switch
- Center Post Cab, ROPS/FOPS
- Continuously Variable Speed Control
- Differential Steering
- Electro-Hydraulic Controls
- Electronic Monitoring System
- Foot Supports, Dash
- Hour Meter, Electronic
- Machine Isolation, Operator Not Present
- Mirror, Rearview
- Modular HVAC, Cab Mounted
- Radio Ready, 12V
- Seat Belt, Retractable 76 mm (3")
- Speed Recall Button
- Throttle Dial, Electronic
- Tilt Cab and Tilt Cab Jack
- Travel Control Pedal
- Wipers, Intermittent
-
- Power Train
-
- Final Drive Flange Protection Guards
- Final Drive Clamshell Guard
- Engine Thermal Shields
- Heavy Duty Final Drive Flange Guards
- Aftercooler
- Air Cleaner, Precleaner with Strata Tube Dust Ejector
- C9.3 ACERT Engine – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
- Continuously Variable Speed Transmission
- Coolant, Extended Life
- Drains, Ecology, Power Train
- Electronic Air Cleaner Service Indicator
- Fan, Hydraulically Driven Demand
- Final Drives, Double Reduction
- Fuel Priming Pump, Electronic
- Parking Brake, Electronic
- Starting Aid, Ether
- Water Cooled Turbocharger, Wastegated
- Water Separator
- Reversing Fan
-
- Undercarriage
-
- Heavy Duty Track (660 mm/26" MS Trap)
- Heavy Duty Track (914 mm/36" MS Trap)
- Guards, End Track Guiding
- Idler Guards
- Master Link
- Idler Seal Guards, Kevlar Design
- Track Roller Frame Debris Guard
- Rollers and Idlers, Lifetime Lubricated
- Sprocket Rim Segments, Replaceable
- Track Adjusters, Gas Spring Recoil
- Grease Track Adjust
- Guard Group, Track Guide
-
- Other Standard Equipment
-
- Fenders, Heavy Duty
- Chassis Guarding on Mainframe
- Seal Guard Group
- Crankcase Guard Group
- Fuel Tank Guards
- Dozer Lines Guards
- Black Hood and Dozer Lift Cylinder
- Screen, Grill Door
- CD ROM Parts Book
- Engine Enclosures, Perforated
- Front Tow Hook
- Grade Control Ready
- Guards, Hinged Bottom
- Hood, Perforated
- Hydraulics, Load Sensing, Dozer Lift and Tilt
- Oil Cooler, Hydraulic
- S·O·SSM Sampling Ports
- Radiator Doors, Louvered, Double Hinged
- Vandalism Protection for Fluid Compartments and Battery Box
- Insulated Clean Emissions Module
Attachments
-
- Lights
-
- Basic (6) Lights
- Premium (10) HID and Halogen Lights
-
- Landfill Bulldozer Blades – With Trash Racks
-
- LGP S
- LGP U