725C2 Articulated Truck

Engine

Engine Model

Cat C9.3

Bore

4.53 in

Stroke

5.87 in

Displacement

567 in³

Emissions

The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.

Note (1)

The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.

Note (2)

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Note (3)

Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.

Note (4)

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Engine Model - U.S. EPA Tier 4 Final/EU Stage IV

Cat® C9.3

Net Power - ISO 14396

316 hp

Gross Power - SAE J1995:2014

320 hp

Peak Engine Torque Gross (SAE J1995)

1275 ft·lbf

Net Power - SAE J1349:2011

314 hp

Peak Engine Torque Speed

1200 r/min

No Engine De-rating Below

7500 ft

Peak Engine Torque Net (SAE J1349)

1262 ft·lbf

Weights

Rated Payload

26.5 ton (US)

Body Capacities

Heaped (SAE 2:1)

19.6 yd³

Struck

14.4 yd³

Tailgate Heaped SAE 2:1

20.4 yd³

Tailgate Struck

14.5 yd³

Transmission

Forward - 1

5 mT/hr

Forward - 2

9 mT/hr

Forward - 3

14 mT/hr

Forward - 4

21 mT/hr

Forward - 5

29 mT/hr

Forward - 6

36 mT/hr

Reverse - 1

6 mT/hr

Service Refill Capacities

Fuel Tank

108.8 gal (US)

Cooling System

21.9 gal (US)

Hydraulic System

29.1 gal (US)

Engine Crankcase

10 gal (US)

Transmission

12.4 gal (US)

Final Drives/Differential

33 gal (US)

Output Transfer Gear Box

6.3 gal (US)

DEF Tank

5.3 gal (US)

Sound Levels

Interior Cab

76 dB(A)

Note (1)

The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

Note (2)

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Body Hoist

Raise Time

10 s

Lower Time

8 s

Standards

Brakes

ISO 3450 – 2011

Cab - FOPS

ISO 3449 Level II – 2005

Cab - ROPS

ISO 3471 – 2008

Steering

ISO 5010 – 2007

Operating Weights

Center Axle - Empty

9755 lb

Rear Axle - Empty

9205 lb

Total - Empty

50795 lb

Front Axle - Rated Load

5512 lb

Center Axle - Rated Load

23700 lb

Rear Axle - Rated Load

23700 lb

Total - Rated Load

52912 lb

Front Axle - Loaded

37374 lb

Center Axle - Loaded

33455 lb

Rear Axle - Loaded

32905 lb

Total - Loaded

103707 lb

Front Axle - Empty

31835 lb

Body Plate

Type

High strength Brinell HB450 wear resistant steel

Turning Circle

Turning Dimensions - Steer Angle - Left/Right

45°

Note

Dimensions are for machines equipped with 23.5R25 tires.

Turning Dimensions - Aisle Width

210 in

Turning Dimensions - Clearance Radius

318 in

Turning Dimensions - Inside Radius

153 in

Turning Dimensions - SAE Turning Radius

294 in

Steering

Lock to Lock

4.75 seconds @ 60 rpm